Fixed a messy room with a built-PAX using Dry Wall [1945003Technical]
Our room was quite messy with lots of things being around different cabinets or on the floor. After some inspiration here, I decided to build a new wall built Pax 4 * 1m and cover the use of dry walls (called in German Knauf Gipskartonplatten aka im Trockenbau).
It also involved the relocation of the output of electricity that otherwise would be covered
Start - .. look right and left to see the situation before the patch
from the left, 3 patens were installed, along with profiles also installed. Otherwise drilling can ceiling.
On the left side profile has been directly attached to the wall and cabinets Pax. Take care to turn it back on the thickness of the drywall panel.
Construction then progressed to the right side, Pax 4 (final).
To look proportional, same width as the left side was used.
On the top, reinforcements were needed for profiles.
After completing the basic construction, dry wall boards were attached.
now, the charge came to cover any gaps and screws.
and Voila, a wallpaper and paint completed the project.
the only thing still remains to do is to attach the skirting and adjust the doors
The author
andre68723
EmoticonEmoticon