Loft Bed / Workstation
Materials: MATERIALS: Fjelldal Loft bed, table VIKA KAJ Leg, Door Solid Birch, thin pine board. TOOLS: table saw, hand saw, screws, some small nails
Description: I made it there as 4 years and did not realize what wonderful even existed Site . Anyway, it was really easy and cheap so I thought I would dig up some photos and sharing.
We wanted a small wokstation in my son's room, and it seemed to be obvious.
I went to the wood shop in search of a kind of counter - everything was coming in> $ 0 - so I ended up going home with a birch door $ 65 solid-core - corresponding perfectly matched and birch finish on the bed Ripped the door of my desired width (I chose a relatively thin 20 ") on the table of my neighbor saw and cut corners with a hand saw. I turned a small piece of pine that was about 1/4 "wider than the width office in the back office (you know, to keep things from rolling off). Some sanding, and a topcoat on it and it has been done.
I added the table leg to prevent deformation, although I think that it was probably excessive total.
Bonus: I ripped another large section 6 "of the door, finished, and set along the bottom with some wood screws to an attractive cable-hider - proved very own
~ John, San Francisco
The author
Julius Yap "I'm Jules, the engine behind IKEAHackers and one that keeps this site running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our beloved IKEA products "
EmoticonEmoticon