night lamp on a Malm bed
Materials: KVARNA, two switches, double tape sticky side and some cables
description: Making the stand 50mm wide sheet of aluminum. Drill a 30mm diameter hole in the end and pass the bulb socket through it. You must drill a small hole into the outlet, roughly 5 mm above the stand and put the power cable, then get another piece of cable and make the proper connections to connect the switch (this cable through the original cable hole in the socket).
Apply two strips of tape and stick finished.
~ Plamen Todorov, Sofia, Bulgaria
the author
Julius Yap "I'm Jules, the engine behind IKEAHackers and one that keeps this site running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our beloved IKEA products "
EmoticonEmoticon