A little light reading in bed
If you are the type who does some reading in bed before turning in, this hack Carter toured. And all for $ 30. Not bad indeed.
Carter said: "This hack uses a Minde Mirror $ 7.99 $ 3.99 two table lamps Mörker Ikea to make a beautiful framed mirror with reading lamps, perfect for on the bed
In addition to articles of Ikea I used 1 × 4 wood tongue and groove tips to make the frame brackets to hold the frame together, 7/16 "bolts for lights, strip to the cords, wood stain, polyurethane finish, and various screws and hanging hardware.
Just cut the planks with angles of 45 degrees at the waist to make the frame around the mirror. Make sure that the groove side is inside the frame. Connect 3 sides together using the brackets. slide the mirror into the slot, then secure the fourth side. then I stained and finished wood. Make -you cover the mirror while doing this., boreholes once dry you want the lights and screw the lights with the bolts. Tape the cords from the back of the mirror and the frame so that they hang closer to the center. Finally, attach the hanging hardware and hang on the wall.
Ikea similar framed mirrors without lights they sell between $ 50 and $ 150. This was done with lights for under $ 30 "
author
Julius Yap "I'm Jules, the engine behind IKEAHackers and one that keeps this site running. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our beloved IKEA products "
EmoticonEmoticon