Sleek Headbord of VIKA Hyttan Table Tops
Materials:
3 VIKA Hyttan 59 "table tops
3 lights INREDA cabinet and connectors
3 6" Hangman wall mounting hardware (available at Ace hardware and online)
description: I came with an inexpensive headboard, modern and easy for our city loft. The three table tops are mounted vertically on the wall and overcame the lighting firm to provide reading lamps.
Step 1:
On the back of each plate, measuring 12 picture carefully side Hangman "to mount up and" "
Step 2.
so what will be the upper edge of each table when mounted, drill holes in right center left to install cabinet lighting
. Step 3:
on the wall, find the center of where the bed will, and ride side of the wall of the first Hangman 12 "below the desired headboard height. Make sure it is at least 47 "on the floor then head will float. If you have baseboard must be at least 47" skirting so off headboard will not hunt.
Step 4:
Measure the center of the two remaining heads and mounting hardware. (See website for advice on mounting 3 photos online so evenly spaced and aligned to the top edge).
Step 4:
The use of supplied screws, attach the INREDA lights at each table top, hide the son behind the headboard All three lights can be connected together using INREDA connectors, or each can be connected individually to the wall so that they can be controlled independently. Note that, at least on the transformer to the fixing stopper wall must be purchased.
Drag your bed to the headboard suspended and you are done.
~ Carrie Maser, Palo Alto, CA
author
Julius Yap "I'm Jules, the engine behind IKEAHackers and one that keeps this site running . My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our beloved IKEA products "
EmoticonEmoticon