Headboard with integrated lighting

Chevet with integrated lighting

needed: 4 - Linnmon Table Tops 47 1/4 "x 23 5/8"; 4 - Lack Shelves wall; 2: 8 of the lamp cords kits; 2: Porcelain Key-less light; 2: CFL Light Bulbs (DUH) 2: Wood veneer; 1: 36 "Cheville, 4 strips of wood; 2: power strips, 2: light switches; 2: Nuts son; 1: Switch Cover to match; 1: 5 '1 × 4, 2: 1/4 "bands" x3 "x8 wood; 12: Supports straight; Many 1 "and 2" screw; Gorilla glue; Wood glue (just in case of mishaps); 1: White pencil to mark the location of the holes; 1: Tube white acrylic paint any retouching in the top

Build :. Bedside:. Tie 9 spaced hooks on the backs of four table tops to gather, and 3 on the front

Stands: Decide on location. Drill holes on each stand throughout. Climb in 1st 1 x 4 stand by to provide support

Light :. Decide light height and mark with pencil. Gorilla Glue 1/4 Small strips "of x3x8" at the front of the headboard Let dry. Fit 1 screw "wood to house key under lights. Drill holes for wiring through. Through Bedside wire lights and attach key-less lights and pull the thread tight. Mount the small strips of wood veneer with wood glue. Let dry. Determine angle drilling ankle. Studs glue in place. Drill holes for anchors to attach to Bedside in 1/4 "x3" x8 "wood already attached. Install the lamp and Plating Cover

Switches :. Determine the lights yarn length to pass and cut. Remaining use with plug to move to power strip switch. Thread with caution

Power Strips :. You can ride wherever you want, but my wife and I decided under the bed would be enough

Good luck.! Hope you enjoy!

Kura beds turn into Tree House Playland

personalized Austmarka without subsidence

The author

Taylor Kraus