Pax Tie Rack komplement Pants Hangers
Materials: Komplement
description: I have a problem. I have a lot of links (somewhere north of 70, including about 18 bow ties). Too much for any "over the counter" door-tie I found. I had been using the three-level Komplement out "multi-use" hanger, but as you can see, it was filled beyond capacity and impossible to keep organized.
before
My plan was to use some small KOMPLEMENT pants hangers ( "the person, not the 28" 13 a ), but the way they are designed, it was impossible to see what was that tie, much less get in and out. first, I had to climb 0 degrees from where they are designed to be mounted -. so that the cross bar, instead of pointing to you Secondly, in order to actually see all the links, and access it more easily, it was logical to mount at an angle Finally, I. insight that will allow me to use the full depth of my wardrobe Pax. the hanger stock pants up in the holes of the plate forward, but since I drill my own hole, I can have in the back and one in front, and the angle allows me to see all the links at once.
I measured the width between the holes, front and rear, and the height of the hole I wanted to use in the back, at a lower I wanted to use up front, and do my best Pythagoras tried to print measure the hypotenuse to drill in the right place. I was close, but as you can see from the photo, my trigonometry is not what it once was. I drilled 1/8 "holes 1cm of the rear edge of each rack. Then I drilled another hole 23.5cm in this hole for the rack in the back of my wardrobe, and pierced 31.5cm outside the rack in front of the wardrobe. using sheet metal screws I joined the small plates that come with the hanger pants to climb to the wardrobe.
once installed, the only problem left was the best way to sort my bonds. I started with something basic- sorting by color and pattern. But since High Fidelity is one of my favorite movies, one of my friends suggested I'm a little crazy and sort autobiographically ... so that what I was doing. I'm going with it! Do not judge me. 
The author
Leigh
EmoticonEmoticon