ODDA and a half
Materials: 2 ODDA cabinets. . Nothing else
Description: I liked the design of the ODDA wardrobe, but one was not enough. My problem is that I have a sloping ceiling, there was not enough room for two of ODDA.
My trick was to use one and a half to two wardrobes and combine them into a single unit.
You start by building a right half-normal.
Then you need to drill some holes 5 mm to secure the middle shelf of the central part.
The most delicate operation is the shortening of the left side. The panels are hollow and wanted to own top edge, so I cut the surplus to the bottom and inserted piece of scrap wood in a vacuum at the bottom.
This panel drilling now need some new enough holes because everything was moved down.
Once the left panel is ready, everything can be assembled as normal ODDA.
As a side note, what remains can be assembled in a cabinet of a module.
My plan is to add an additional compartment with a hinged door from above on the top right side. This will give a nice effect stair and more storage at no charge.
~ Finn Bo Jørgensen, Brittany, France
author
Julius Yap "I'm Jules, the engine behind IKEAHackers and one who maintains this website and in the course of execution. My mission is to capture all the wonderful, inspiring, clever hacks and ideas for our beloved IKEA products "
EmoticonEmoticon